SWORKz S12-2C EVO LIMITED (Carpet Edition) 1/10 2WD EP Off Road Racing Buggy Pro Kit
Product number:
SW910033CEL
€419.00
Delivery time: 1-3 days
Availability:
6 available
Piece
Deliveries to non-EU countries may be subject to additional duties, taxes and fees.
Properties "SWORKz S12-2C EVO LIMITED (Carpet Edition) 1/10 2WD EP Off Road Racing Buggy Pro Kit"
| Application: | Offroad |
|---|---|
| Brand: | SWORKz |
| Size: | 1/10 |
| Type: | Electro |
| Version: | 2WD, Kit |
The SWORKz S12-2C Evolution LIMITED(Carpet Edition)
1/10 2WD contains all option parts you need. Race the car exactely like our factory pilots. The following parts are included in the LIMITED kit:
SW220039D - SW2200413D - SW220041MF - SW220034A - SW332029 - SW330689 - 2x SW332041
It is an evolution from the
successful S12-2C platform. The new geometry of the car provides
optimized corner speeds and easy handling on carpet and very high grip
tracks.
The S12-2C EVO features a new carpet
version gear box system on a T7075 hard anodized and lightened aluminum
chassis. It has a layout that allows up to 6 different battery
positions. The flex of the chassis can be changed by adjusting the
sideguards.
The S12-2C EVO comes with SWORKz brand new designed 1/10 Pro-Shock
System (Short version). The shocks come with new Emulsion Precision
Plastic Shock Caps, Shock Pistons with Seal Parts. The kit comes
standard with a 4mm carbon carpet version front shock tower and newly
designed front C-Hubs. The Teflon coated shock shafts provides smooth
shock reactions. Black Line springs which are newly designed with
rotation fixed spring holders comes standard in the SWORKz S12-2C EVO
kit.
A brand new 5.5mm linkage ball stud system
are included in the S12-2C EVO kit. Adjustable Ackermann plate and
Carbon steering plates are included too. The S12-2C EVO has new angled
lower arms that provide a lower Shock position which leads to a lower
center of gravity.
The kit is equipped with a quick release gear differential system, which
can be mounted in 3 different positions. The rear lower arms are angled
and the rear shock tower (carpet version) has got different height
positions. The weight of the gearbox is optimized to a perfect balance
between size and strength.
The rear shock tower (carpet version) of
the S12-2C EVO is made of carbon. The wing mount holder's height and
angle can be adjusted. The rear width of the S12-2C EVO can be changed
with the new Synthesis Rear Hub System and rear CVD modularity.
The SWORKz S12-2C EVO has a front sway bar and a completely new rear
sway bar holder system.
The 2-Pad Slipper of the SWORKz S12-2C EVO comes with hard anodized
plates, high temperature resistant slipper pads and a spur gear
protection with a engraved SWORKz logo.
The S12-2C EVO body shell has good aerodynamics.
The SWORKz development team focused on
using materials, corresponding to the highest quality standards, when
designing the car. You will find only 100% SWORKz quality in the S12-2C
EVO kit.
- T7075 hard anodized & lightened aluminum chassis
- Adjustable flex system with various sideguards
- 6 different battery positions
- 4mm Carbon shock tower
- New C-Hub geometry
- Changeable Ackerman plate
- Carbon steering knuckle plates
- Front sway bar system
- Super light anodized front wheel axles
- Front wing mount with 65mm front wing
- Front aluminum toe in plate
- Front lower arms in angled design
- Easy adjustable Ackerman plate
- The brand 5.5mm linkage ball stud system
- Adjustable differential position
- Quick differential release system
- Lower shock position design with adjustable shock tower position
- Brand new design SWORKz 1/10 Pro Shock System (Shorty version)
- Adjustable rear wing height
- Adjustable rear wing angle
- Rear width adjustable with hubs included length adjustable CVD
- New Synthesis Rear Hub System
- Fully adjustable square aluminum toe in plate „SWORKz“ engraved
- New designed rear sway bar holder
- Rear wheel hex hard anodized
- Rear Carbon Shock tower
- Super light CAD optimized gearbox
- 2 Pad Slipper System with hard anodized plates
- Slipper Anti-Clock rotation adjustment
- High temperature resistant slipper pads
- Spur gear protection with laser Logo
- Precision plastic emulsion shock cap system
- Unique designed shock stud screws
- Hard anodized stock studs
- Black line shock spring
- Rotation protected spring holder
- Teflon hard coated shock shaft
- Hard coated shock body
- 6 Ball bearings servo system
- Quick release electronic plate
- Battery pad included
- Balanced motor position
- Body shell with optimized aerodynamic design
- Kit
- Manual
- Bodyshell clear
- Decals
- Tools
- No electronis
- No tires
- Length：410mm
- Width： 242-248mm
- Height：148mm
- Ground Clearance：40mm
- Wheelbase：282-284mm
- Track：F:220mm /R221mm
- Gear Ratio: S:81/21T
- Weight：1380g+/-10g (Race Condition)
Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Speedmaster Hobby Co., LTD.
Ruiguang St., Xiangshan Dist., 1F., No.40
30093 Hsinchu City, Taiwan
Details of the responsible person (information obligations under the GPSR Product Safety Regulation)
