HOBBYWING XERUN XR8 Pro G3 200A 2-4S

Xerun XR8 Pro G3 brushless controller 200A, 2-4s LiPo, BEC 6A

suitable for 1/8 Off-Road, On-Road, Racing, 1/10 Short Course, Monster Truck

The XR8 Pro G3 regulator sets new standards. 15% smaller, more powerful and with an even lower temperature generation is the third generation of this series compared to its predecessor. And designed for use with 2-4S LiPos batteries, the optimized cable routing as well as the noble appearance are examples of the high-quality workmanship. So if you value a powerful controller that takes up little space, you've found your new favorite in the XR8 Pro G3.

In terms of functionality, points are scored with an extended BEC of 6 or 7.4V. This means that even more servos can be addressed than with conventional controllers. The greatly increased capacitor capacity is also a real improvement. And those who place a lot of value on the power measurement itself will of course also get their money's worth. Because if the controller is linked with the Hobbywing application, the collected data can not only be evaluated, but also viewed live.

Features:

• Over 30 different setting parameters
• 3 preset setting profiles for 1/8 Racing (e.g. Zero Timing/Blinky Mode, 1/8 Off-Road Racing, 1/8 On-Road Racing)
• Includes dual-brake mode to switch between normal brake mode and disc-brake mode
• Average 15°C cooler working line under full load than the XR8 Pro G2
• Super BEC with max. 12A and 6V or 7.4V for use of various servos
• Internal protection against incorrect connection of the battery
• Thermal protection of the capacitors, so that explosions are prevented
• Easy programming possible without any cables using the OTA programming module, the LCD programming box or a smartphone
• Evaluate the data with the associated app offline and in real time

• Technical data:
• Type: Brushless Sensored
• Current (long/short): 200A/1080A
• Number of cells: 2S-4S LiPo
• BEC: 6V/7.4V with 6A (switch mode)
• Waterproof: No

• LCD programming box G2
• OTA Programming Module
• Programming interface
• Dimensions: 54,8x36,8x38,8mm
• Weight: 102.8g
• Usage: 1/8 Off-Road, On-Road, Racing, 1/10 Short Course, Monster Truck